Cor-A-Vent Product Guide

Guide to COR-A-VENT ® Products & Applications These are general application guidelines. Ultimately, the building professional has to determine which product is the “Best Fit” for his/her application based on building codes, prevailing weather patterns and product venting capabilities. For product end views & dimensions, please refer to Application Drawings CAV-EV . Most of our application drawings are available in .dwg & .pdf file formats on our website at www.cor-a-vent.com/drawings.htm Roof-2-Wall Vent ™ Roof2Wall Vent ™ Complete ventilation package for the tough-to-vent detail where a pitched roof meets a vertical wall. • 6 (six) 4-foot pieces of Roof-To-Wall Vent (24 lineal feet) that provide 6.75 square inches of Net Free Vent Area per lineal foot while stopping rain and snow at the point entry thanks to the Enhanced Snow Screen • 25-foot by 14" wide roll of aluminum flashing • A tube of polyurethane caulk (black in color) • A bag of 2½" roofing nails • 4 (four) R2W End Plugs Soffit Vents S-400 Strip Vent Continuous strip soffit vent for hard-to-vent eave details – from zero overhang to open rafter. • Narrow 1" profile easily concealed • 10" NFVA per linear foot 24 – 4' pieces per carton PS-400 • 1" x ¾" x 4' profile ideal for 1x soffit panels • 10" Net Free Vent Area per linear foot 48 – 4' pieces per carton RS-400 • Power nail to the bird block for quick installation • 18.75" Net Free Vent Area per piece • Available in Black or White 48 – 22½" pieces per carton Specialty Products Sturdi-Starter 4-foot long x 1¼" wide x 5 ⁄ 16 " thick (8 mm) profile extruded polypropylene plastic strip used as a starter strip behind the first course of fiber cement siding. 30 – 4' pieces per bundle Sturdi-Spacer Introducing the new Sturdi-Spacer ™ – a heavy-duty, breathable spacer strip for retro-fitting new metal roofing over existing shingle roofs. 72 – 4' pieces per bundle IN-Vent ® • Intake ventilation when soffits or overhangs are inaccessible – perfect for re-roof jobs • Won’t crush or compress after installation • 10" Net Free Vent Area per linear foot 64 linear ft. per ctn. plus 2½" roofing nails and IN-Vent end cap sections Black, White or Tan Black or White 06/06/2016 V-600– 11" & 8½" The highest airflow in the industry for nearly every pitch – from 3/12 to 16/12. • Available in 11" and 8 1 / 2 " widths • 20" NFVA provides superior ventilation • Radiused peak keeps the ridge well defined • Regular and Enhanced versions 12 – 4' pieces per carton V-600T & V-600TE • For use with Metal or Tile applications • 1" x 3¼" x 4' profile • 10" NFVA, per linear foot, per piece • Covers: 48 l.f. ridge, 96 l.f. roof to wall 24 – 4' pieces per carton V-300– 11" , 8½" & 7" An ideal hip and ridge vent with a low 5 ⁄ 8 " profile that virtually disappears beneath the cap shingle and even lower price – the best value in the industry. • Available in 11", 8½" and 7" widths • Power-Nailable • 13.5" NFVA • Use on pitches from 3/12 to 16/12 • Regular and Enhanced versions 12 – 4' pieces per carton or bundle V-600 ® Revolution ® Rolled Ridge Vent V-300 ® REV-11 and REV-9. The first shingle-over ridge vents made from 100% pre-consumer recycled plastic. Revolution is the only truly “Green” ridge vent available. The vent core is made entirely from the same polypropylene plastic used to manufacture all of COR-A-VENT’s other products. • 20-foot long by 11" or 9" wide rolls • 100% pre-consumer recycled polypropylene • Net Free Vent Area: 12 square inches per linear foot • Power nailable • Color: Black Packaged with two coils of 1¾" galvanized roofing nails and two End Plugs Rainscreen Siding Vent System SV-3, SV-5 & Sturdi-Strip ™ Trapped moisture behind siding can wreak havoc on your home’s exterior, causing peeling paint, rotting wood, deteriorating underlayment, and mold or mildew growth. COR-A-VENT ® SV-3 and SV-5 Siding Vents and Sturdi-Strips allow that moisture to drain out and let air pass through to keep your wall system dry. • SV-3: 7 ⁄ 16 " thick, 24 – 4' pieces per box • SV-5: ¾" thick, 15 – 4' pieces per box • Sturdi-Strips (SS-112): 3 ⁄ 8 " thick, 112 – 4' pieces per box Sturdi-Batten ™ Sturdi-Batten is a vented batten strip for use with vertical siding, cedar shakes & shingles, or siding panels. Vertically-oriented airways allow both moisture drainage and drying airflow between your siding and housewrap, adding life to your home’s exterior. • SB-48: 7 ⁄ 16 " thick, 48 – 4' pieces per bundle Sturdi-Batten ™