| |
 |
|
 |
| |
|
Shingle Applications
The beauty of a shingle roof is enhanced since COR-A-VENT
does away with unsightly roof vents. The ridge vent
is nearly invisible when installed. COR-A-VENT provides
a balance ventilation system ideally suited to a wide variety
of shingle designs.
7" & 8" Enhanced Ridge Caps
• V-300 - 7" & FAV-20 - 7"
9" Hip & Ridge Caps
12" Shingle Cap
Click here for more info
on Shingle Ridge Vent Applications |


V-300E 8.5 " |
|
Cedar Applications
COR-A-VENT ridge vents come in several different widths to fit beneath
more narrow caps, like cedar shakes and shingles. With the variety
of performance options available, it's easy to match one of our products
to your specific needs.
Click here for more info on Cedar Ridge Vent Applications |


V-300 8.5 " |

V-600TE |
|
|
Tile/Slate Applications
COR-A-VENT ridge vents are the ideal products for tile and slate roofs
because they're guaranteed to last the life of the roof they're installed
upon! COR-A-VENT works with all brands and styles of tile, and
it's easy to install after the roof is dried in.
Barrel/Mission & "S" Tile • V-600TE
Slate • V-400E - 11" • V-400E - 11"
Flat Tile
Click here for more info on Tile/Slate
Vent Applications |


V-400E 11 " |

V-600TE |
|
|
Metal Applications
COR-A-VENT is the ideal companion for today's popular metal roof designs. It
works well with any architectural design and any brand of metal roofing. Efficient
attic cooling action prevents "sweating" - protecting attic and roof from
moisture damage.
Standing Seam
Profile
Metal Shake
Click here for more info on Metal Ridge
Vent Applications |


S-400 |
|
Soffit Applications
S-400 Strip Vent is a slender, one-inch -wide eave/soffit vent - in fact,
it's the narrowest continuous strip vent on the market today! It's
nearly invisible, so eaves are easy to ventilate while retaining a high
degree of archtectural flexibility. COR-A-VENT soffit vents all
provide 10 square inches of Net Free Ventilation area per foot, and when
used with COR-A-VENT ridge vents, they promote an uninterrupted flow
of air to keep under-roof spaces cool.
Use PS-400 and RS-400 for non-typical eave installations.
S-400 - Zero overhang, wood soffit, frieze board.
PS-400 - Use on 1" x wood soffit panels.
RS-400 - Open rafter details.
Click here for more info on Soffit
Vent Applications |


FAV-20E |
| Specialty Applications
Architectural design freedom calls for the flexibilty of COR-A-VENT. Whatever
the application - COR-A-VENT eliminates the unsightly, traditional roof
vents used to ventilate the attics of hip, cclerstore, salt box, unequal
pitch, modern shed or half roof sytles - we have the application for effective
attic ventilation. COR-A-VENT draws out hot, moist air all year 'round
without the use of fans or any moving parts.
This low-profile system works well on those hard-to-vent roofs.
Hip Roof • All V-300, V-300E, FAV-20, FAV-20E, X-5 and V-400E products.
Shed Roof • S-400
Siding Ventilation • SV-3 (3-ply) • SV-5 (5-ply)
In-Vent • On the Roof Intake Vent
Unequal Pitch • Use X-5 (cut in half)
Roof to Wall • Metal Roofs - V-600TE • Shingle,
Cedar Shake & Flat Tile - use the Roof-2-Wall vent kit
Metal Roof & Side Walls • Purlin
vent - to maintain air passageway between
metal roofing/siding & insulation
|
|
|
 |
|
 |
| |
 |
|
 |
|