1-800-837-8368

Ventilation Products

 

Interactive Product Guide

interactive product guideNow you can view all of our products with our new Interactive Product Guide (opens in new tab).  










 

Revolution Rolled Ridge Vent

COR-A-VENT, Inc. is proud to introduce the first shingle-over ridge vent made from 100% pre-consumer recycled plastic, new Revolution Rolled Ridge Vent.

Revolution (REV-11 and REV-9) is the only truly "Green" ridge vent available. The 11-inch and new 9-inch wide by 20-foot long plastic vent core is made entirely from the same polypropylene plastic used to manufacture all of COR-A-VENT’s other products. We meticulously capture the excess scrap during production, reprocess it and feed it directly into the Revolution, keeping it out of landfills while also reducing the use of petroleum needed for new plastic production.

Click here for more information on the Revolution Rolled Ridge Vent


V600®E & V-600®T


NEW V-600E in 11" and 8 1/2" widths are the same great product as regular V-600 but with an added Enhanced Snow Screen™ to prevent fine snow from entering the ridge vent.

Click here for more information on the V-600, V600E & V-600 T/TE Ridge Ventilation System
  

 

V-30Revolution Rolled Ridge Vent0®

V-300 - 11", 8 1/2"

An ideal ridge vent with a low 5/8" profile that virtually disappears beneath the cap shingle and even lower price - the best value in the industry.

Available in 11", 8 1/2", & 7" widths
 
  • Power-Nailable
  • 13.5" NFVA
  • Use on pitches from 3/12 to 16/12
  • Regular and Enhanced versions
  • 12 - 4' pieces per carton or bundle
  • V-300E products are ideal for hip use.
Click here for more information on the V-300 Ventilation Product

S-400 & PS-400

S-400 Strip Vent

Continuous strip soffit vent that's perfect for hard-to-vent eave details - from zero overhang to open rafter and everything in between.
 
  • Narrow 1" profile easily concealed
  • 10" NFVA per lineal foot
  • Available in white, black, or tan
  • Now available with type 304 Stainless staples - Special order Item
  • 24 - 4' pieces per carton
Click here for more info on the S-400 Soffit Vents, Ventilation Product.

PS-400
 
  • 1" x 3/4" x 4' profile ideal for 1x soffit panels
  • 10" Net Free Vent Area per lineal foot
  • Available in white or black
  • Now available with type 304 Stainless staples - Special order Item
  • 48 - 4' pieces per carton
Click here for more info on the PS-400 Soffit Vents, Ventilation Product.

Raft-A-Vent RS-400

RS-400
 
  • Power nail to the bird block for quick installation
  • 18.75" Net Free Vent Area per piece
  • Available in white or black
  • Now available with type 304 Stainless staples - Special order Item
  • 48 - 22.5" pieces per carton
Click here for more info on the Raft-A-Vent System, Ventilation Product

  SV-3 & SV-5 Siding Vent

 
Siding Vent Detail
  • Helps to prevent paint from peeling.
  • SV-3 = 5 Sq. In. NFVA per lineal foot.
  • 7/16" x 3" x 4' cross section.
  • SV-5 = 8.5 Sq. In. NFVA per lineal foot.
  • 3/4" x 3" x 4' cross section.
  • Prevents moisture from being trapped behind the siding.
  • Made from heat resistant polypropylene.
  • Power nailable
For more information check out SV-3 & SV-5 Ventilation Products.
 

Sturdi-Strips ® Furring Strips

 
Sturdi-Strips
  • 7/16” thick by 3” high3/8” thick by 1 ½” wide
  • Easy-to-handle 4-foot long sections
  • Pairs great with the SV-3 siding vent, or doubled up to match
  • SV-5 siding vent
  • 112 pcs. per carton (448 lin. feet)
  • Color: Black
  • Heat-resistant: made from profile extruded polypropylene plastic
  • Impact-resistant: screw, staple or power-nail in place
  • Crush-resistant: Will not compress like “drainage mat” products
  • Pairs great with the SV-3 siding vent, or doubled up to match SV-5 siding vent
Click here or more information on the Sturdi-Strip Ventilation Product

Roof-2-Wall

 
Roof-2-Wall
Roof-2-Wall Vent does just what it says – it’s a ventilation package for the tough-to-vent detail where a pitched roof meets a vertical wall. Roof-2-Wall Vent incorporates the Active Weather Foil technology and enhanced snow screen feature of our X-5 ridge vent line to stop rain and snow at the point of entry.

Each carton contains six 4-foot pieces (24 lineal ft.) of Roof-2-Wall Vent, a 25-foot long x 14-inch wide roll of flashing, one bag of 2 1 /2" nails and four EC-400 Roof-2-Wall end caps. 8.5" NFVA

Click here for more info on the Roof-2-Wall Ventilation System
 

IN-Vent ®

IN-Vent
IN-Vent® is an on-the-rooftop intake ventilation product, when traditional soffit vents can not be used
 
  • Low 1" profile easily concealed
  • 6.75" NFVA per lineal foot
  • 6 four-foot pcs. (64 lineal ft.) per carton
Click here for more info on the IN-Vent®, Ventilation Product


Cor-A-Vent Sturdi-Starter ™

 
Sturdi-Starter
Sturdi-Starter™ is a 4-foot long x 1 1/4" wide x5/16" thick (8 mm) profile extruded polypropylene plastic strip used as a starter strip behind the first course of fiber cement siding. Sturdi-Starter™ replaces strips ripped from good planks of siding, saving the installer money and materials, time on the job and extra labor.
 
  • A prefabricated starter strip for use behind the first course of fiber cement siding, as well as above windows and doors.
  • Saves money, time and labor – no more cutting starter strips from good planks of siding.
  • Durable and impact resistant – Power nailable or install with staples or screws (use siding manufacturer's recommended fastener).
  • Easy-to-handle 4-foot strips install fast and clean.
  • Made with heat resistant 5/16" (8 mm) thick polypropylene plastic – lifetime warranty
Click here for more info on the Sturdi-Starter ™, Ventilation Product

Purlin Vent

 
Provides cross ventilation both horizontally and vertically between the purlins.
 
  • Provides a thermal break with an R value of 3.1
  • Net free vent area (NFVA) of 40 sq. in. per 4' section.
  • Made from thermally stable, crush resistant polypropylene (PP) sheets
  • Doesn't compress over time, so roofing & siding screw holes don't elongate and leak.
  • Supplements ASHRAE 90.1 - 1999 Model Energy Code (MEC) requirements when vapor barriers greater than 1 perm are used.
  • NAIMA, NIA and 2000IEEC call for cold side ventilation as a design consideration in controlling condensation and meeting required U values of the Model Energy Code.
Click here for more info on the Purlin Vent, Ventilation Product
 
To learn more about our Ventilation Products click here to contact us.

 
Interactive Product Guide  Product Guide         Product Downloads  Product Downloads       Like us on Facebook  Like us on Facebook Follow us on Twitter  Follow us on Twitter

The News Feed

Looking for Sturdi-Starter & Sturdi-Battens in the Pacific NW?
New Cor-A-Vent siding accessories available in the Pacific NW through Sound Building Supply
VIDEOS: Cor-A-Vent Rainscreen Siding Vent System in the Wild
Two great examples of how Cor-A-Vent's Siding Vent System is installed
NEW -- Roof-2-Wall Kit Now Includes Caulk
Tube of Polyurethane Caulk Now Included in Cor-A-Vent's Roof-2-Wall Kit
View all blog posts »